| Customization: | Available |
|---|---|
| Automatic Grade: | Automatic |
| Type: | Hot Melt Adhesive Labeling Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Paper Board pressing machine
The paper pressing frame is mainly used for the printing and packaging industry flattening in corrugated laminating, is one of the indispensable equipment in printing and packaging industry. This machine has the function of flat shaped. Applicable to all types of printing and packaging carton factory.
Technical parameters
1 the maximum work area:
1000mm*1100mm (ZXYP-1100)
1200mm*1300mm (ZXYP-1300)
2 the maximum pressure: 3T
3 plate action speed: 72mm/s
4 wire rod diameter and lead: 60 x 1100mm
5 motor power: 1.5KW/380V
6 motor speed: 940r/min
The 7 dimension (length * width * height):
1400mm*1100mm*1800mm (ZXYP-1100)
1500mm*1200mm*1800mm (ZXYP-1300)
8 net weight: ZXYP-1100 type: 350KG
ZXYP-1300 type: 400KG
The structure and the principle of
This machine is mainly composed of a machine frame, a pressing plate and a transmission of three parts.
Controlled by the driving device of guide screw 1 and plate 7 to move up and down, and the platen 10 matched to achieve flattening. Pressure limiting switch 6 on the control pressure, lower limit 3/5 / protect the effective working stroke. The pressure spring 4 flattened intensity control.
Instructions for use
The power supply is switched on, the platen 10 middle place the paper(paper height must be higher than the limit switch 5), press the button switch 2, plate 7 downward movement, to achieve the appropriate paper is pressed to the paper; fit completely flatten, press the 2 button on the pressure switch, pressure plate rose 7, can remove the paper.
Maintenance
1 before starting to check the power supply voltage and voltage compliance with machine.
The 2 machine in the adjustment and maintenance, please cut off the power supply, to ensure safety.
In 3 the machine to stop using, please turn off the power, can prolong the service life of electrical appliances.
Between the 4 screw rod and a drive nut should be regularly filling of lubricating oil, to make the machine working flexible, smooth.
The 5 should always pay attention to keep the machine clean, regular inspection of two sets of limiting the travel switch is effective, in order to avoid out of control.
| Delievery Time | 15 days after receiving payment |
| Packing Way | Wooden Case |
){kind=link}