Corrugated Cardboard Flute Lamination Corrugated Carton Flute Laminating/ Paperboard Laminating/ Litho Laminating/ Paper Mounting Machine

• After-sales Service: Online Support & Free Parts
• Warranty: 1 Year
• Bottom Paper Thickness: 300g-10mm Thickness
• Top Paper Thickness: 120g-800g
• Maximum Speed: 150m/Min
• Power: 25kw
• Model NO.: ZGFM-1450
• Transport Package: Iron Plate and Film
• Specification: CE SGS
• Trademark: Innovo
• Origin: China
• HS Code: 8441809000
• Production Capacity: 30PCS/Month

Product Description

ZGFM series Automatic high speed flute laminating machine

1. Product description
1.1 Function:
The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.

1.2 Structure:
A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from above.
B. Bottom feed: It can send 0.5~10mm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed paper.
D. Regulatory organization - Fits the two papers according to the set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section.

1.3 Principles:
The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

1.4 applicable materials:
Paste paper --- 120 ~ 800g/m thin paper, cardboard.
Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.


Structural features:
Adopting the world's leading transmission control system, only need to input paper size system auto-tuning.

Computerized high-speed fitting, up to 150m/min.

Chuanliu-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.

Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker

Use multiple sets of electric eyes to know the advance position of the bottom line, and make the servo motor on both sides of the face paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.

Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.

Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.

 
Parameters:

Model	ZGFM1450	ZGFM1650	ZGFM1900
Max size	1450*1450mm	1650*1650mm	1900*1900mm
Min size	360*380mm	360*400mm	450*450mm
Top Paper	120-800g	120-800g	120-800g
Bottom paper	≤10mm ABCDEF corrugated board ≥300gsm cardboard	≤10mm ABCDEF corrugated board ≥300gsm cardboard	≤10mm ABCDEF corrugated board  ≥300gsm cardboard
Max speed	150m/min	150m/min	150m/min
Power	25kw	27kw	30KW
Stick accuracy	±1mm	±1mm	±1mm

 

BRANCH  INTRODUCTION:
1. BOTTOM SHEET FEEDING

Use imported Servo motor controlling system, with Japan NITTA suction belt and big air blower to ensure smooth feeding of 2ply, 3ply, 4ply, 5ply and cardboard.

2. TOP SHEET FEEDING MECHANISM

Both paper lifting and feeding nozzle of high speed auto dedicated feeder can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump, ensure top feeding paper run fast and smoothly. 


3. ELECTRICAL SYSTEM 

Designed and adopt U.S.A Parker motion controller together with Yaskawa Servo system and inverter, Siemens PLC to ensure machine run at max. speed and accuracy as premium performance and running stability.

4. PRE-STACK PART

Pre-pile system with preset function can be set as paper size through touch screen and oriented automatically to reduce set-up time efficiently.  

5. Transmission System

Gates synchronous belt together with SKF bearing as main transmission is adopted to ensure stability. Both pressure rollers, dampening roller and glue value can be easily adjusted by handle with mechanical encoder. 

6. POSITIONING SYSTEM & GLUE ROLLER 

Photocell together with Parker Dynamic module and Yaskawa Servo system ensure the accuracy of orientation of top and bottom paper. Stainless steel glue roller with fine anilox grinding to guarantee even glue coating even at min. glue quantity.

7. TOUCH SCREEN OPERATION SYSTEM

It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot.

8. AUTOMATIC LUBRICATION SYSTEM

Automatic lubrication pump for all main bearing ensure machine strong endurance even under heavy duty working condition.



Machine transport and packing

__________________________________________________________________________