1020E automatic embossing machine: the machine speed of 5000 / hour. Suction paper towers are four suction and two delivery, driven by the air pump to suction and delivery paper. There are two controllers in front of the paper feed, and when the machine takes two or more sheets, it automatically stops. Take the cardboard with a suction under the wind to make paper more stable, the paper went to the front gauge position is skewed control, if the paper skew or not go will automatically shut down. Embossed by the rubber drum and plate cylinder composition, rubber roller diameter of 455mm, outsourcing a layer of 1.9mm thick printing blanket. Mounted roll diameter of 455.5mm, outsourcing a layer of 1mm thick corrosion of stainless steel plate. The blanket is fitted with teeth, the paper is bitten by the rubber roller, and then passed through the lines between the two rollers.
Configuration instructions:
1. Host part of the advantages:
a. Highly received paper teeth, bite the paper stable
b. high-speed pull gauge, pull paper with good accuracy
c. independent drum, exterior stainless steel embossed version
d. independent external gears to increase the pitch, the host gear in the rack outside the high-speed import machine installed
e. Double control, if there are two or more sheets of paper, the machine will automatically stop paper
f. Skew control, the paper has skewed automatically to the paper
g. use cam teeth, teeth. So that the machine to reduce the burden, you can speed up to 5000 / hour
2. Feeder: the whole system imitation import printing presses
a. Take the cardboard with a new suction, so that thick paper or tissue paper more stable
b. with preloaded paper
1020E embossing machine use frequency converter to drive the motor, the machine has PLC control, the machine between the two rollers have 500 tons of pressure. The machine speed can reach 5000 / hour.
The same type of product comparison:
1. Fast at all times 5000pcs/ hour (the same type of speed at home and abroad the highest)
2. Bite paper stable, overprint accurate. ± 0.15
3. Embossing is greater. (Thicken rollers on the basis of the original thickening, to avoid the paper when the paper bending and more forceful wall structure and thickness of a substantial increase in a solid structure, compared to other similar products hollowed out the structure of the use of more security and security )
4. With double sheets, skewed, multiple control. (Equipment is more safe and stable, while reducing paper loss)
5. The machine with pre-loaded paper, save time and increase production.
6. All imports of electrical equipment. Performance, security, better protection, walking in the fine line.
7. Processing process: forging finished into the 800 ºC baked room stew fire processing. To prevent deformation of the casting, the material more solid.
Product Technical Parameters
Model
|
1020E |
| Max paper size |
1020*720mm |
Min paper size
|
450*390mm
|
| Max embossing size |
1020*700mm
|
Paper thickness
|
157-1000gsm |
Feeding height of paper
|
1200mm
|
Delivery height of paper
|
1100mm
|
Max speed
|
5000 pcs/hour
|
Temperature range
|
80-150 degree
|
Total power
|
17KW
|
Machine weight
|
7000KG
|
Machine dimension
|
5700*2000*1800mm
|
Max working pressure
|
500T
|
Roller parameter
| Roller |
Diameter of embossing roller
|
455.5mm
|
Diameter of liner plate roller
|
454.5mm
|
| Liner plate roller |
Thickness of roller surface
|
65mm
|
Diameter of shaft head
|
160mm
|
| Embossing roller |
Thickness of roller surface
|
65mm
|
Diameter of shaft head
|
160mm
|
| Wall version |
Height
|
1125mm
|
Thickness
|
730mm
|
| Precision of machine |
Chromatography
|
±0.2mm
|
Thermostat
|
±2 degree
|
Pressure
|
±0.05mm
|
Product description:
Machine use [round pressure round environment-friendly (no ink) series of special embossing machine]
It is suitable for high-grade wine box, cosmetics box, medicine box, food box, cigarette box and Taiwan calendar box advertising and other products, it can form a folding pattern, laser pattern, frosted pattern of ice pattern and convex and other patterns, The most advanced and most practical postpress equipment.
Main performance:
Its main work performance can be reflected in the machine plate plate surface with exquisite grape version, through the deep embossed pressure, the surface of the textured directly to the paper, gold and silver cards or PET film and other special paper;
Machine characteristics:
1. Have the leading international technology
2. Overall performance and stability, energy consumption, green
3. With low cost, security features
4. The whole machine is nice, easy to operate, easy to maintain
And the difference between the traditional embossing machine:
Special deep embossing machine is no ink, environmentally friendly packaging equipment, in the gold and silver cardboard, PET, laser film and other packaging products on the formation of folding lines, frosted, ice, local pattern, laser pattern, three-dimensional animation and other effects, Is today's packaging and printing industry is a good helper.
The traditional embossing process is the use of mechanical embossing or paper on the paper method, in its surface to form a convex pattern, the paper more texture. Embossed the process is very simple, flat sheet of paper dry, into the embossing machine, under the pressure of the two rollers cut into rolls. One of the rollers is engraved with an embossed pattern, and the paper is embossed. As the embossed paper has a deep texture, it is usually only one side of the paper.
However, the special deep embossing machine using holographic laser and optical refraction principle, the required grain pattern transferred to the gold cardboard, silver cardboard, laser rainbow plain cardboard or sprayed aluminum paper and UV on white cardboard, The formation of a strong refraction effect, can make the printed products luxurious eye-catching, exquisite, far more expensive than ordinary printing and packaging. It also has a low cost, security features. The new technology and new products can be widely used cigarette packets, wine box, drug boxes, cosmetic boxes, tea boxes, calendars, greeting cards and other packaging on the printing.
Machine detailed pictures:
Matching rotten plate:
Production process of rotten plate:
1. The photosensitive glue sprayed on the surface of stainless steel drying
2. Take the film on the spray of stainless steel on top of the above, into the copy machine copy
3. The developer is placed in the developing tank, and then the stainless steel plate
4. End of development, stainless steel version into the oven
5. rotten version: the end of the oven after the stainless steel into the bad machine.
6. After the end of rotten version, into the back of the plastic plate, and then into the glue back, all the photoresist back, and then installed embossed.
Finished embossing pattern:
Machine transport and packing
1. The packing of small machines is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.
2. In order to be waterproof, we usually use bubble film to wrap machine.
3. We can handle shipping for customers too.
Our company
Certificate:
FAQ:
______________________________________________________________________
Q1: Are you a manufacturer?
Yes, we are specialized manufacturer of hot foil stamping machine and die cutting machine in China over 20 years.
Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of machines have in stock, please check with us before ordering.
Q3: How about installation and training?
Installation and training: If purchaser's engineer travels at own cost to China, free training session. If engineer sent to purchaser's factory, all travel cost paid by purchaser.
Q4: How about warranty?
Warranty period: 12 months from the shipping date of machine. Warranty will be not valid if machine subject to misuse or accidental damage or operator's error. During the valid time, we will supply spare parts. If you have any other questions, pls contact us and we will reply you through product's photos and videos to make every detail clear.
Why choose us?
_____________________________________________________________________
1.Our brand "INNOVO" is well-known in our domestic market and over 70 countries and territories. Europe, South America, Latin America, Southeast Asia, Middle East, Africa etc.
2.Genuine products with excellent quality. Company has always proved the 100% quality.
3.After-sales service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs. After-sales service provided engineers available to service machinery overseas.
4.Cost saving: lon-life, shock resistant and high reliability bearings with excellent quality and better performance, resulting in increased cost saving.
5.Less cost of purchase: We are the manufacturer directly.
6.Attendant customers queries promptly.
){kind=link}