Automatic High Speed Sheet to Sheet Flute Laminating/Litho Laminating/ Paper Mounting/Flute Laminator/Litho Lamiantor Machine with Flip Flop Stacker

• Customization: Available
• After-sales Service: Door to Door
• Warranty: 2 Years
• Model NO.: ZGFMS-1450/1650
• Down Paper Thickness: 300g-8mm Thickness
• Surface Paper Thickness: 120g-800g
• Maximum Speed: 12000 PCS/H
• Max Size: 1700*1700mm
• Min Size: 380*400mm
• Precision: 1mm
• Transport Package: Wood Package
• Specification: CE SGS
• Trademark: Innovo
• Origin: China
• HS Code: 8441809000
• Production Capacity: 30PCS/Month

Product Description

                                                          Automatic High Speed Flute Laminator With Auto Rolling-over Machine


 

1. Product description

1.1 Function: The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.

1.2 Structure: A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from above. B. Bottom feed: It can send 0.5~10mm paperboard from below. C. Gluing mechanism: The glued water can be applied to the fed paper. D. Regulatory organization - Fits the two papers according to the set tolerances. E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section.

 

1.3 Principles:

The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

 

1.4 applicable materials:

Paste paper --- 120 ~ 800g/m thin paper, cardboard.

Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.

Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

 

 

Structural features:

Adopting the world's leading transmission control system, only need to input paper size system auto-tuning.

 

Computerized high-speed fitting, up to 150m/min.

 

Chuanliu-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.

 

Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker

 

Use multiple sets of electric eyes to know the advance position of the bottom line, and make the servo motor on both sides of the face paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.

 

Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.

 

Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.

 

Parameters:

 

 

Model	ZGFM1450	ZGFM1650	ZGFM1900	ZGFM-2200
Max size	1500*15000mm	1700*1700mm	1900*1900mm	2200*2100mm
Min size	360*380mm	380*400mm	450*450mm	500*500mm
Top Paper	120-800g	120-800g	120-800g	120-800g
Bottom paper	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard
Max speed	150m/min	150m/min	150m/min	150m/min
Power	22kw	25kw	27KW	30KW
Stick accuracy	±1.0mm	±1.0mm	±1.0mm	±1.0mm

 

 

BRANCH  INTRODUCTION:
1. BOTTOM PAPER FEEDING

 Use imported Servo motor electric controlling system, with Japan NITTA suction 
belt to make suction power inverter, and belt cleaned by water roller; Patented 
technology to ensure corrugate and cardboard goes out smoothly and simple operation.

 

2.  TOP SHEET FEEDING MECHANISM 
Both paper lifting and feeding nozzle of high speed auto dedicated feedr can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump. Ensure top feeding paper run fast and smoothly.

 

3. ELECTRICAL SYSTEM 

Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance. 
 

4. PRE-STACK PART

 Pre-pile system with preset function can be set as paper size through touch screen and oriented automatically to reduce set-up time efficiently.

 

 5. TRANSMISSION

Gates synchronical belt together with SKF bearing as main transmission is adopted to ensure stability. Both pressure rollers, dampening roller and glue value can be easily adjusted by handle with mechanical encoder.

 

6. POSITIONING SYSTEM & GLUE ROLLER 

 

 The use of multiple sets of photoelectric sensor at bottom sheets relative position,
control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.

Stainless steel roller, never rust, after narrowly grinding,
guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.

 

7. TOUCH SCREEN OPERATION SYSTEM

 It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot

 

9. SHAFTLESS SERVO FEEDER(OPTIONAL)

 

This system is for option, more suitable for long size top sheets.

LEADING EDGE FEEDING SYSTEM(OPTION)


This system is for option,more suitable for large size and thick bottom sheets.

Machine transport and packing

__________________________________________________________________________



 

1. The packing of  small machines is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.

2. In order to be waterproof, we usually use bubble film to wrap machine.

3. We can handle shipping for customers too.

Our Company:
_____________________________________________________________________

 

Certificate:
______________________________________________________________________


FAQ:
______________________________________________________________________

Q1: Are you a manufacturer?
Yes, we are specialized manufacturer of hot foil stamping machine and die cutting machine in China over 20 years.

Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of machines have in stock, please check with us before ordering.

Q3: How about installation and training?
Installation and training: If purchaser's engineer travels at own cost to China, free training session. If engineer sent to purchaser's factory, all travel cost paid by purchaser.

Q4: How about warranty?
Warranty period: 12 months from the shipping date of machine. Warranty will be not valid if machine subject to misuse or accidental damage or operator's error. During the valid time, we will supply spare parts. If you have any other questions, pls contact us and we will reply you through product's photos and videos to make every detail clear. 

Why choose us?
_____________________________________________________________________

1.Our brand "INNOVO"  is well-known in our domestic market and over 70 countries and territories. Europe, South America, Latin America, Southeast Asia, Middle East, Africa etc.

2.Genuine products with excellent quality. Company has always proved the 100% quality.

3.After-sales service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs. After-sales service provided engineers available to service machinery overseas.

4.Cost saving: lon-life, shock resistant and high reliability bearings with excellent quality and better performance, resulting in increased cost saving.

5.Less cost of purchase: We are the manufacturer directly.

6.Attendant customers queries promptly.