Automatic High Speed Flute Laminator With Auto Rolling-over Machine
Max.speed: 12000sheet/hour
The production line consists of a flute laminating machine and a fully automatic pile turning machine. The high speed flute laminating machine is suitable for the stick of paper and corrugated board. The motion control system is perfectly integrated with the servo correction system. Using the relative position of multiple sets of photoelectric induction paper, the servo motor on both sides of the control paper is independently compensated, and the position of the bottom paper is tracked by the paper. Make the paper and the bottom paper accurately positioned. The machine is easy to operate and simply input the size of the paper, the machine will be adjusted by itself.
The fully automatic turning machine can complete the paper stacking, saving manpower and space, and solving the problem of bending deformation after the paper is attached.
Parameters:
| Model |
GFM-1450 |
GFM-1650 |
| Max size |
1450*1450mm |
1650*1650mm |
| Min size |
450*450mm |
450*450mm |
| Applicable paper |
150-800g/m2 |
150-800g/m2 |
| Bottom paper |
A-F corrugated board, ≤10mm |
A-F corrugated board, ≤10mm |
| Speed |
150m/min |
150m/min |
| Sticker accuracy |
±1.5mm |
±1.5mm |
| Power |
33Kw |
38kw |
| Machine dimension |
22500*2200*2850mm |
22500*2300*2850mm |
BRANCH INTRODUCTION:
BOTTOM PAPER FEEDING:
Use imported Servo motor electric controlling system, with Japan NITTA suction belt to make suction power inverter, and belt cleaned by water roller, Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.
TOP SHEET FEEDING MECHANISM:
Equipped with high speed auto dedicated feeder, both paper lifting and feeding nozzle can freely adjust angle to the paper, to ensure that whether thick or thin paper can be delivered rapidly and smoothly.
ELECTRICAL SYSTEM:
Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.
PRE-STACK PART:
Pre-stack pile of paper under the condition of non-stop, improve efficiency. The special design of the pre stack paper frame, save time and effort.
TRANSMISSION:
With imported double teeth belt drive and Switzerland ROSTA tension device ensure the drive accurate, stable and low noisy.
POSITIONING SYSTEM:
The use of multiple sets of photoelectric sensor at bottom sheets relative position, control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
GLUE ROLLER:
Stainless steel roller,never rust, after narrowly grinding, guaranteed the minimum amountglue coated evenly. Down roller be cleaned by water roller.
LEADING EDGE FEEDING SYSTEM(OPTION)
This system is for option,more suitable for large size and thick bottom sheets.
ZS1450 Pile turner stacker
Product description
The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.
The automatic pile turner machine is an accessory product of the Flute Laminating Machine, and includes a feeding table, a turning table and a paper receiving table which are sequentially assembled. Wherein, the receiving table is connected with the pick-up unit, and the paper count is stacked into a counting pile and sent into the turning table. The counting paper stack is turned over once and not turned to the top of the turning table by using the turning mechanism in the turning table. Then, the push mechanism is fed into the top of the receiving table, and after the whole paper is finished, the paper is dropped onto the pallet of the receiving table. In this way, the paper is fully automated for paper counting, paper turning, and paper stacking, and has the effect of flattening and affixing the paper, greatly reducing manpower requirements, and effectively improving the paper-receiving efficiency. Reduce the manual delivery intensity.
Parameters:
| Model |
ZS1450 |
| Max size |
1450*1450mm |
| Min size |
450*550mm |
| Power |
8kw |
| Voltage |
380VAC/3P |
| Speed |
10000pcs/h |
| Air pressure |
0.65-0.85Mpa |
| Machine weight |
4000kg |
| Machine dimension |
4780mmX2170mmX2850mm |
Pre-sales service: online 24 hours a day; provide information, videos, prices;
After-sale service: Engineers can be dispatched for installation training, and the buyer needs to pay the engineer's air ticket and salary, and provide accommodation. In special circumstances, remote online video guidance is supported.
Warranty: The warranty period is one year. Except for man-made damage, it is the seller's responsibility to provide accessories for free during the warranty period.
Machine transport and packing
__________________________________________________________________________
1. The packing of small machines is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.
2. In order to be waterproof, we usually use bubble film to wrap machine.
3. We can handle shipping for customers too.
Our Company:
_____________________________________________________________________
Certificate:
______________________________________________________________________
FAQ:
______________________________________________________________________
Q1: Are you a manufacturer?
Yes, we are specialized manufacturer of hot foil stamping machine and die cutting machine in China over 20 years.
Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of machines have in stock, please check with us before ordering.
Q3: How about installation and training?
Installation and training: If purchaser's engineer travels at own cost to China, free training session. If engineer sent to purchaser's factory, all travel cost paid by purchaser.
Q4: How about warranty?
Warranty period: 12 months from the shipping date of machine. Warranty will be not valid if machine subject to misuse or accidental damage or operator's error. During the valid time, we will supply spare parts. If you have any other questions, pls contact us and we will reply you through product's photos and videos to make every detail clear.
Why choose us?
_____________________________________________________________________
1.Our brand "INNOVO" is well-known in our domestic market and over 70 countries and territories. Europe, South America, Latin America, Southeast Asia, Middle East, Africa etc.
2.Genuine products with excellent quality. Company has always proved the 100% quality.
3.After-sales service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs. After-sales service provided engineers available to service machinery overseas.
4.Cost saving: lon-life, shock resistant and high reliability bearings with excellent quality and better performance, resulting in increased cost saving.
5.Less cost of purchase: We are the manufacturer directly.
6.Attendant customers queries promptly.
){kind=link}