Customization: | Available |
---|---|
After-sales Service: | S Available to Service Machinery Overseas |
Warranty: | One Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Machine details:
1, Cutting Parts
Imported parts and standard parts have special trademarks and they cannot be counterfeited; the high price of a die-cutting machine arises from the highly standard configuration as all bearings are from Japan SK and key parts from better Sweden SKF. It is integrated with Taiwan highly precise intermittent reduction gear, and Germany main chain, even every a little screw is in the topmost grade 12.9, and undoubtedly they are very important for the product quality.
3, Electrical Parts
4,Standards for Assembling
This die-cutting machine is assembled to satisfy a high requirement, so our company has established many high standard part tolerances and assembling levels; e.g. the bearing tolerance is within 0.02mm; the hardness of each quenched part is 45° above; all bearing are assembled in the best process - hot assembling to prevent forced knocking, and each part is assembled with a clear tolerance record. When the assembled machine is operated with no load for 48 hours, the bearing temperature cannot be 10°C higher than the room temperature. No disorderly shutdown is allowable within 500 pieces of paper, and there mustn't be any nonacceptable noise from the finally assembled machine. In all, each machine is followed by a list of acceptance check, and it will not be accepted if any item is beyond the standard.
5,Human culture principle
The deep company culture make every employee know that quality is the core meaning of life, united to keep improving is the basic requirement for being a person and producing a machine, and saving money for the client, helping the client to earn money, and assisting the client in development are our service principle. We hope each client can deeply and favorably know our products. We believe that our high quality products will be one of your wealth sources.
II. Descriptions of the entire product
This is the key device for the production of paper boxes and high standard paper products, etc. It is especially applicable to the automatic die-cutting and stripping of complicated paper boxes and cigarette cases to rationalize the production of paper boxes. This machine is integrally assembled, transported and mounted, it can be put into operated in one day, and thus the cost is reduced. The precise assembly and high configuration make it better than Taiwan machines and competitive with Japan machines.
Advantages of our die-cutting machine:
1,Paper Feeding Unit and Paper Conveying Unit
Paper Feeding Unit:
1) The enlarged paper feeding head (Feida head) has 9 suction nozzles applicable for paper in different thicknesses and 5 paper feeding nozzles which can be independently adjusted for parallel paper feeding. It also has 4 paper lifting nozzles which can move up and down in a large stroke especially applicable for small corrugated paper. The large power wind pump provides a high suction force. It can be conveniently adjusted; paper can be divided reliable, and it runs fast and stably.
2) By the special secondary paper feeding and preliminary paper stacking, the primary and secondary can be shifted to ensure uninterrupted paper feeding.
3) To improve the working efficiency, paper feeding and collecting are realized by Taiwan dual-speed reduction motor which provides a long service life and a high torsional force, and it saves time due to its high lowering speed.
Paper Conveying Unit:
1) The paper conveying part is made of stainless steel plate to prevent rust and provide stable and correct paper conveying.
2) Paper is positioned by a pushing unit and a pulling unit which can be shifted conveniently for different specifications of paper.
2,Paper Die-cutting Unit
1. Die-cutting unit eliminated castings wallboard due to casting wallboard has small pull, large deformation and without limitation, instead it uses steel wallboards like Japan. To increase pulling force is to increase pressure, and it is strong and durable, changeless form.
2. Automatic pressure control and automatic adjust compasses make the machine achieve new successes. This added functions, make it become the digital equipment, handling fast, convenient to use.
3. Taiwan high-pressure oil pump, use crush type for lubrication, reducing parts attrition and increasing oil temperature cooler to lubricant for cooling, on the main chain for regular lubrication, improve equipment efficiency.
4. It has novel drive mechanism, execute high-speed die-cutting, high accuracy of swinging rod platform and improve the pad speed (almost don't need mat), we should know, a lot of manufacturers exist pressure uneven problem.
5. Pneumatic locking plate device has firmer upper frame, saving time. Our company produces the die-cutting machine simultaneously to nether frame around for air lock, leading to strong accuracy, speed fast. All other manufacturers are just using screw fastening.
6. Gripper bar chains are imported from Germany, to ensure the service life and stable die cutting precision.
7. Taiwan intermittent institutions is the main transmission requirements for die-cutting machine, it can improve die cutting speed, die-cutting precision, lower noise. Using home-made intermittent cannot reach the speed and precision on this level.
8. Torque limit device can do overload protection, in overload situation, master-slave separation will guarantee safety of machine in operating. Italian imported pneumatic brake clutch, and Japan SMC rotating adapter, satisfies European standards, clutch rapidly, great strength smoothly, long life and low noise.
3,Foil Stamping Unit
1,The foil can step in both cross and longitudinal two directions (2 cross rollers and 3 longitudinal rollers), which can greatly meet different client's needs in various stamping.
2,The foil can step, which greatly meet client's needs in various stamping. 12 heating zones can be set individually and in constant temperature.
3,Adopting imported servo-motor and computer for foil control system, foil convey and tension is constant.
4,The adoption man-machine interface monitors to show the system, making the machine circulate the appearance to be clear at a glance; breaking down the manifestation, breaking down the exclusion with proficiency, real realizes person machine dialogue, person machine exchanges.
5,PLC and many electronic components are famous imported brand, which insure the machine to be safe and reliable.
6,Adopting imported servo-motor and computer for foil control system, the foil conveyed synchronal, tension is constant and the transmission leapfrogging is more accurate.
4,Delivery Unit
1. Automatic vacuum paper, orderly and clean
2. Non-stop delivery gate plate can improve efficiency. When the paper stack is high enough, we can pull out the collect cardboard and push-in another piece deceive paper gate plate to change at the same time, thus achieved the non-stop delivery.
3. Pneumatic sampling, which are accessible at any time to check the die cutting paper, very convenient.
5,Electrical Unit
1. Imported numerical control system with 15''LCD touch-display terminal is convenient for data input and control.
2. The machine has all servo controller system will control five rollers leapfrogging and twelve heating zones pressure.
3. Electric control system adopts Germany SIEMENS PLC computer automatic controller, it has function of full-automatic detection and control from giving paper, lose paper to die cutting, deceive paper.
4. The man-machine interface display system can display various working conditions, point out that the fault location and put forward the corresponding solutions
5. It is equipped with various safety protection devices. When one unit is at fault, there will be an acousto-optic alarm, and automatic stop to ensure safety of both man and machine.
Specifications:
Model |
TMY1080-H |
Max.Paper Size |
1080*780mm |
Min. Paper Size |
400*370mm |
Max.Diecutting Size |
1060*760mm |
Max. Stamping Range |
1050*750mm |
Max.Diecutting Speed |
7000s/h |
Max.Stamping Speed |
6000s/h |
Max.Feeding Pile |
1600mm |
Max.Delivery Pile |
1400mm |
Sheet Thickness |
Cardboard:0.1-3mm Corrugated board:less than or equal to 4mm |
Die-Cutting Precision |
Plus or minus 0.1mm |
Stamping Temperature |
0-20degree |
Heating Plate Zone Number |
12 |
NO.of Foil Rollers |
3 Vertical and 2 Horizontal |
Max. Length |
1800-2200m |
Max.Pressure |
320t |
Total Weight |
18t |
Heating Plate Zone Power |
18kw |
Total Power |
40kw |
Overall Dimension |
6070×4040×2460mm |
Vertical foil stamping section performance specification |
|
Max. foil width |
1060mm |
Min. foil width |
25mm |
Max. length of pull foil |
760mm |
Max. pull foil roll diameter |
200mm |
Horizontal foil stamping section performance specification |
|
Max. foil width |
730mm |
Min. foil width |
25mm |
Max. length of pull foil |
1060mm |
Max. pull foil roll diameter |
240mm |
Packaging & Shipping
1. The packing is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.
2. In order to be waterproof, we usually use bubble film to wrap machine.
3. We can handle shipping for customers too.
We provide 12 months warranty. During warranty, we provide free technical support and free normal spare parts for replacing, except for man-made damage.We can go to your country to debug machine when you have questions can not resolve,but you must pay 100usd/day to our engineer.
Innovo look forward to long term cooperation with customers, we will make best service and aftersales service for all of our customers.
*With 10 years' Experience
*Having ISO 9001-Certified Factory
*Strong R&D capability
*High Quality Guaranteed
*First Class Service And Best Prices
*Primary products:
Automatic High Speed Flute Laminater
ZXSCM Book Case Making Machine
650UV Coating Machine
ZX-650C Manual Paper Pasting Machine
Box Making Machine
Hot Melt Gluing Machine and Gluing Machine
Table Gluing Machine
Paper Pressing Machine.etc
Welcome to visit our factory!
1.What is Innovo company machine warranty?----one year.
2.Does your machine with CE certificate?----Yes.
3.What is the production time while placing order?----Arounding 7-30 days
4.What is the delivery time?----Within 7-30 days after get the payment.
5.Can Innovo company handle shipping for customers?----Yes.(Please provide us your requested seaport and we can check the shipping charge and arrange shipping for your order)
6.Does the packing strong?----Yes, of course! All of our export packing is with strong wooden case, all are confirm to export packing standard.
7.How about after-sales service process?----When your machine has problem, contact your sales and we will solve your problem as soon as possible.
8.Are you a manufacturer?----Yes, we are a manufacturer with 10-year experience and profession.
9.What is the minimum quantity for order?----Trial order 1 pc is acceptable, we done business step by step with high quality products and excellent services.
10Do you have stock product to sell?----Maybe, It depends on which machine you like.
11Do you inspect the finished products?----Yes, each step of production products will be picked out inspection by QC department before shipping.
12.What's the payment term?----T/T 30% in advance, the balance paid against the copy of B/L. We accept payment via West Union too. You can choose as you like.
We are professional manufacturer since 2005. We believe our products will provide you with great business benefits and advantage.
Our faith:
1) Society's Avail First
2) Client's Avail First
3) Employee's Avail First
4) Enterprise's Avail Second
If you have any inquiry, please don't hesitate to contact us. We will reply you at the first time as we can.
Innovo China