ZXD-1400/1700/1900A Servo Precision High Speed Sheet Cutter
ZXD-1400A/1700A/1900A Servo Precision High Speed Sheet Cutter apply the advanced technique of Germany and England. The machine computer control system apply AC servo motor and AC transducer. The convener belt apply NITTA from Japan. The pneumatic vibrator apply FINOLEVA from Switzerland. The electrical system adopts SCH NEIDER & OMRON. The speed of cutting paper is fast and stable. Germany precise bearing and cutting knife assure the high cutting precision. And the touch screen makes the operation easy. The anti-curve rack assures the paper flat. This machine is very popular in the paper making and printing industry.
Model |
ZXD-1400/1700/1900A |
Model of cutting paper
|
The up knife cut reciprocally and the down knife is fixed
|
Thickness of cutting paper
|
60-550GSM
|
Max. scroll diameter
|
1800mm(71'')Max
|
Max. paper-cutting width
|
1400mm/1700mm/1900mm
|
Cutting length Range
|
450-1450mm
|
The format of slitting
|
2 sheet
|
Cutting precision
|
The cutting length 1000mm is: ±0.5mm
The cutting length>1000mm is:±0.1% |
Max. cutting speed
|
300cuts/min
|
Max. cutting meter speed
|
300m/min
|
Paper piling height
|
1500mm
|
The request for air compressor
|
0.8Mpa
|
Power consumption
|
380V/220V,50Hz
|
G.W. |
9500/10500/12000KGS
|
The cutting precision
(Due to the paper's density, quantities and the materials are different. When the cutting length≤1000mm, the cutting precision is: ±0.5mm, When the cutting length≥ 1000mm , the cutting precision is:±0.1%. When speed changed to ±0.1%. Above data is just based on the stable and correct operation. (The cutting precision is just for one reel)
Output
(Actual output depends on the paper's material,weight,cutting length,number of rolls paper, technology of operator and operating conditions, etc.)
Electric appliance unit
Overlapping unit
Retro flexion unit
Cutting knife unit
(Specification)
- (High-precision single knife cutting machine)
(Upper knife roller)
|
Adopt the cutting method from UK to reduce the paper cutting load and noise effectively, prolong the life of knife. The main part of upper knife roller used the fine steel welding, and will precision processing the balance adjustment, it can reduce the shake and noise effectively when the machine at high-speed working.
|
(Down tool rest)
|
Using the iron one batch forming casting, then precision processing, with good stability.
|
(Drive roll)
|
Roller's surface adopts the expansion texture design, and the roller which pressurizes the paper is controlled by the cylinder.
|
(reciprocally knife)
|
Made with special alloy steel and precision machining, long life, knife edge is easily to adjust.
|
(Safety cover)
|
When open the safety cover ,it will automatic stop, safety and security.
|
1. (Prismatic adjustment system for paper)
Type: Adopting the UK knife seat fixed method to fixed, save time and effort to improve efficiency.
2. (Equipment of static eliminator)
(Type)
|
Plasma rod type, to eliminate the static electricity on paper.
|
(Main engine)
|
Efficient electrostatic
|
(The rod of electrostatic elimination )
|
Effective discharge range:1400mm
|
3.(Automatic counting and label inserting equipment)
(Type)
|
Precise counting and horizontal insert
|
(Function)
|
A. Input the counting number of paper into the computer, then it can insert the label according to the setting value;
B. Supply sheet for the defect paper
|
4. (Paper delivery unit)
(Type)
|
Transport horizontally and speed of multi-steps is different; In order to show the effect the separate counting and stack. (Conveyer belt: NITTA brand from Japan)
|
(The 1st transport section)
|
Rapid separate the cut off papers
|
(The 2nd transport section)
|
Independent or linking control that can convey the paper overlapping each other. (Timing belt: From Ningbo)
|
(The paper conveying section)
|
Elaborate paper separator can adjust by coordination with the web quantity. And the pressurized transport wheel can steady paper, avoid excursion.
|
5.(Automatic stacker)
(Type)
|
Hydraulic-lift paper stacker, when the paper is stacked up to a certain level the lift will fall automatic.
|
(Max. paper pilling height )
|
1300mm(51'')
|
(The size of the collecting paper)
|
W=1400mm(55''),L=1450mm(57'')
|
(Stacker)
|
Electrodynamics knocking up in the front,Pneumatic knocking up on the both sides,Adjustable tail-board. |
6. (Computer Operation Unit - SCH NEIDER brand )
Easy to operate
|
The cutting length, quantity and the total amount of output can input directly
|
The actual cutting length and the quantity will show in the screen immediately.
|
7.(Driving motor system)
Reciprocally knife AC servo drive
|
1 SET
|
(HuiChuan brand)
|
Transporting AC motor
|
1 SET |
(Shanghai FUTIAN brand)
|
The 2nd conveyor belt with inverter motor
|
1 SET |
(Shenzhen)
|
Lifting stacker unit --- AC motor
|
1 SET |
(Shenzhen)
|
The front collecting unit -AC motor
|
1 SET |
(Shenzhen)
|
Paper rack-AC motor
|
1 SET |
(Nanjing)
|
8.(Single arm oil pressure shaft less paper rack)
Max. scroll diameter
|
1800mm(71'')
|
Max. paper-cutting width
|
1400mm/1700mm/1900mm
|
Min. paper-cutting width
|
500mm(20'')
|
The diameter of the paper tube
|
3'',6'',12''
|
Oil hydraulic drive |
The clamp arms' open & close, moving forward &backward, driven by oil hydraulic cylinder.
|
The clamp arms lift,driven by the oil hydraulic cylinder.
|
Air brake clutch (SHANGHAI).
|
Web lead roller and the related kickstand.
|
9.(Tension control system)
Tension control system
|
Pneumatic tension control, and change the strength of brake by the Pneumatic arms go up and down.
|
10.(Optional)
Optional |
Double arm oil pressure shaft less paper rack (Two reel)
|
One set of slitting knife
|
Three sets of slitting knife and waste collection system |
Equipment of automatic vacuum
|
Machine transport and packing
1. The packing of small machines is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.
2. In order to be waterproof, we usually use bubble film to wrap machine.
3. We can handle shipping for customers too.
Our company
Certificate:
FAQ:
______________________________________________________________________
Q1: Are you a manufacturer?
Yes, we are specialized manufacturer of hot foil stamping machine and die cutting machine in China over 20 years.
Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of machines have in stock, please check with us before ordering.
Q3: How about installation and training?
Installation and training: If purchaser's engineer travels at own cost to China, free training session. If engineer sent to purchaser's factory, all travel cost paid by purchaser.
Q4: How about warranty?
Warranty period: 12 months from the shipping date of machine. Warranty will be not valid if machine subject to misuse or accidental damage or operator's error. During the valid time, we will supply spare parts. If you have any other questions, pls contact us and we will reply you through product's photos and videos to make every detail clear.
Why choose us?
_____________________________________________________________________
1.Our brand "INNOVO" is well-known in our domestic market and over 70 countries and territories. Europe, South America, Latin America, Southeast Asia, Middle East, Africa etc.
2.Genuine products with excellent quality. Company has always proved the 100% quality.
3.After-sales service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs. After-sales service provided engineers available to service machinery overseas.
4.Cost saving: lon-life, shock resistant and high reliability bearings with excellent quality and better performance, resulting in increased cost saving.
5.Less cost of purchase: We are the manufacturer directly.
6.Attendant customers queries promptly.