CE Approved High-pressure heat transfer machine
Characters of this Ordinary Flat Heat transfer Machine:
1. Combines 6 heat pipes, both upper and lower are aluminum plate, the electrostatic paint spraying.
2. Electronic controls the temperature and time.
3. Sophisticated design, 6 dense heat pipes ,heat evenly, and not easy to deformation.
SPECIFICATION
| Model |
Printing Area
(CM) |
Voltage
(V) |
Power
(KW) |
Temperature
(C) |
Time Rangs
(S) |
Weight
(KG) |
Packing Dimension
(CM) |
| ZXT-001A |
38×38 |
110/220 |
1.8 |
399 |
0-60 |
30 |
72.5×44×39 |
| ZXT-001B |
40×50 |
110/220 |
2.4 |
399 |
0-60 |
34 |
72.5×58×39 |
| ZXT-001C |
40×60 |
110/220 |
3.8 |
399 |
0-60 |
45 |
72.5×68×39 |
Operation Procedures:
Taking the white cotton cloth as an example
A. Mirror print your picture on light sublimation paper with normal ink
B. Hold up the press handle, open the heat board
C. Instruction light will be on
D. Switch power on
E. Adjust the temperature controller on the left side.(The three buttons indicate ones place, tens place, hundreds place from left to right side),press + or - to adjust appropriate heating temperature-180°C, time needed approx. 10 minutes to reach 180°C;(Heating temperatures depends on materials, please request for the standard temperature information)
F. Adjust time controller on the right to the appropriate heating time 30 seconds(The heating time depends on the materials)
G. The machine will keep the constant temperature status when reaching the setting temperature
H. Put the cloth on the silica gel board holder, put the picture facing the cloth for heat transferring,press down the heat board and the timer counts automatically. Note:Too heavy pressure may cause the handle transformed. Must adjust the pressure ahead of operation.
I. While time up,the buzzer warns automatically. Swift the power off, hold up the press handle,take out the cloth and tear out the picture paper right away
Taking the black cotton cloth as an example:
A. Print your picture on dark sublimation printing paper with normal ink
B. Hold up the press handle, open the heat board
C. Instruction light will be on
D. Switch power on
E. Adjust the temperature controller on the left side to adjust appropriate heating temperature-180°C, time needed approx. 8 minutes to reach 180°C
F. Adjust time controller on the right to the appropriate heating time 30 seconds
G. The machine will keep the constant temperature status when reaching the setting temperature
H. Put the cloth on the silica gel board holder, put the picture facing the cloth for heat transferring, then put the adiabatic paper / cloth onto the picture, press down the heat board and the timer counts automatically
I. While time up,the buzzer warns automatically. Swift the power off, hold up the press handle,take out the cloth and take away the adiabatic paper 30 seconds later ( for adiabatic cloth, can take away immediately and no need to wait ) Make sure to take the material out from the machine once finish working.
For metal material board, the heating temperature should be approx. 170-200°C,the heating time around 60 seconds; For ceramic board, the heating temperature should be approx. 200-220°C,the heating time around 60 seconds; For the fabric, the heating temperature should be approx. 120-140°C,the heating time around 5-10 seconds. Please take the below information for example:
Audited Supplier 
){kind=link}
){kind=link}